Poster hanger

Make a magnetic poster hanger to display your favorite posters and prints.

Age
7+ yrs
Time
20–30 min
PDF

What do you need?

Materials

  • Wood
  • 10 mm round magnets with adhesive backing
  • Jewelery chain link
  • Miniature screws

Tools

  • Mitre-box
  • Mitre saw
  • Drillpress
  • 10 mm forstner bit
  • Screwdriver
  • Sandpaper
  • Ruler
  • Pencil
  • Small awl

Steps

1

Cut the wood

  • Measure the with of the artwork you want to hang.
  • Use the mitre box to cut 4 piezes of wood to that width.
2

Sanding

  • Use the sandpaper remove any splinters or sharp edges.
3

Drill holes

  • Set your depth stop to just a bit less than the thickness of your magnets.
  • Use a fixture to drill holes in exactly the same places on all 4 pieces of wood.
4

Placing the magnets

  • Good to knowThe magnets are paired. When placing the magnets, make sure they are in the right place.
  • Stick the magnets into the recesses.
  • Test if your sticks will clamp together.
5

Attach the chain

  • Cut 13 cm of chain link.
  • Find and mark the center of one of the wooden pieces.
  • Use the awl to make a small hole 6 cm to the left and right of the center.
  • Attach each end of the chain using the small screws and the holes you just punched.
6

Finished

  • Clip your favorite artwork in your holder and hang it on the wall.